CONEC
D-SUB/IP67 D-SUB
D-SUB Connectors are used in nearly all application markets, from control and measuring to telecommunications and computer applications.
CONEC D-SUB connectors are available as D-SUB Standard, D-SUB High Density, D-SUB Filter, D-SUB Combination, D-SUB Filter Combination and D-SUB hoods variants in five standardized housing sizes. iDepending on the mounting type and number of poles, a choice can be made between crimp, wire-wrap, solder pin, solder cup and insulation displacement terminal connection types.
Owing to the combination of various contact types there are numerous possibilities of saving installation space and costs in the interface area.
CONEC IP67 D-SUB connectors
Industrial use in harsh environments requires connector systems that meet special requirements. Whether in traffic control systems, photovoltaic systems, construction machinery, surveillance cameras or off-shore wind farms, modern industrial applications place high demands on the connectors used. IP67 D-SUB connectors are used where dust and moisture occur and could impair the function of systems that are not specially protected. CONEC IP67 D-SUB connectors are available in five standardized housing sizes, three different housing designs (CONEC SlimCon, Solid Body, Standard housing) and in the variants IP67 D-SUB Standard, IP67 D-SUB High Density, IP67 D-SUB Filter, IP67 D-SUB Combination and IP67 D-SUB Hoods.
The CONEC Snaplock mounting type is offered as a quick-
Product group
CONEC Series D-SUB Filter connectors
With increasing data transmission rates and operating frequencies, it is becoming increasingly important to ensure the function of electrical devices and systems in each other’s environment in order to guarantee trouble-free operation. CONEC filter connectors help to dissipate conducted interference directly at the interface. This means that this interference does not reach the device in the first place. Space is also saved on the circuit board, as there is no need to install a complex filter on it. Filter D-SUB connectors are available as standard, high density or dual port.
CONEC IP67 D-SUB connectors
D-SUB Combination connectors offer the possibility to equip a proven design with new functionality. This is done by using different contact types without having to change the shape, size and installation dimensions of the connector itself. By using high-current contacts, the power supply of the device can be realized without an additional interface for the power supply. High-voltage contacts allow operating voltages of up to 2.8 kV.
Fast signal transmission over shielded coaxial lines is achieved with the use of special coaxial contacts. A choice can be made between the Combination D-SUB, Combination D-SUB High Density and Combination D-SUB Dual Port series.
In all variants, different combinations with signal, high current, high voltage or coaxial contacts are possible. The combination of different contact types offers interesting possibilities to save space and costs in the interface area. The connectors are always supplied with signal contacts, except for the crimp version. The high-current, high-voltage and coaxial contacts can be ordered separately or can be mounted in the connector at the factory.
CONEC SnapLock D-Sub Hoods & Connectors
You are searching for a D-SUB hood system that enables quick and easy locking and unlocking without additional tools? That allows a locking even at poorly visible device interfaces due to the audible and tangible ” click”? Do you want to upgrade an existing system with quick-release Hoods? The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick locking.
CONEC Series IP67 D-SUB SlimCon
The IP67 D-SUB CONEC SlimCon connector series offers very small dimensions in addition to its one-piece zinc die-cast housing. The size of the housings corresponds to the standard dimensions of D-SUB connectors, so no new cut-outs are required and a 1:1 conversion from standard IP20 systems to the IP67 system of the CONEC SlimCon series is possible. Compared to IP67 protected connectors with an extended sealing frame, IP67 D-SUB CONEC Slimcon connectors achieve a reduction of the occupied area of 48% to 52%.
CONEC Series IP67 D-SUB Hoods
IP67 Hoods are available in housing sizes 1 to 5 and can accommodate various cables with a diameter of 7 to 16 mm, depending on the size. In addition to a very compact hood, the portfolio also includes variants with a large interior and protective caps. The IP67 D-SUB hood versions are available shielded and unshielded – alternatively with short screw or jack scre
Benefits
D-SUB Connectors
- Proven design – new functionality
- 5 housing sizes
- Current rating Power contacts up to 40 A
- Coax contacts 50/75 Ohm
- High-voltage contacts: up to 2.8 kV
- Wide range of mounting options
- High-quality precision machined contacts
CONEC IP67 D-SUB connectors
- One-piece zinc die-cast housing (Solid Body and CONEC SlimCon)
- Space-saving design (CONEC SlimCon)
- Low weight
- 1:1 conversion from IP20 to IP67 interface possible (CONEC SlimCon)
- Shock- und vibration resistant according to IEC60807-2 (CONEC SlimCon)
- Suitable for harsh environments
Applications
D-SUB Connectors
- Application markets
- Control and measuring to telecommunications and computer applications.
- Aerospace technology
- Mechanical engineering
- Medical technology
- Military
- Telecommunications
- Test and measurement technology
CONEC IP67 D-SUB connectors
- Whether in traffic control systems
- Agricultural technology
- Automation technology
- Aviation
- Communication technology
- Drive Technology
- Medical technology
- Railroad technology
- Safety and monitoring systems
- Modern industrial applications place high demands on the connectors used
Download
DoD-SUB/IP 67 D-SUB Conectors
D-SUB Filter Standard/HD